Additively Manufactured Smart Materials and Structures

Design, Processing, and Applications

Häftad, Engelska, 2025

AvVelu,Rajkuma,Rajkumar Velu,Kalim Deshmukh,Inigo Flores Ituarte,Anand Kumar Subramaniyan,India) Velu, Rajkumar (Additive Manufacturing Research Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Jammu, J&K,Czech Republic) Deshmukh, Kalim (Senior Researcher, New Technologies - Research Centre, University of West Bohemia,Finland) Ituarte, Inigo Flores (Automation Technology and Mechanical Engineering, Faculty of Engineering and Natural Sciences, Tampere University,India) Subramaniyan, Anand Kumar (Indian Institute of Technology Jammu, J&K

3 979 kr

Beställningsvara. Skickas inom 7-10 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

Additively Manufactured Smart Materials and Structures: Design, Processing, and Applications provides a critical overview of the fabrication, design, processing, characterization, structure-property relationships, and applications of 3D printed smart materials. The book practically outlines design strategies and manufacturing techniques across a variety of disciplines, including membrane technology, catalysis, batteries, supercapacitors, sensing, biosensing, aerospace, automobile, construction, and biomedical. Users will find a critical evaluation of the scientific literature that has already been published to highlight the significance, the technoeconomic aspects, the major difficulties, and the benefits and drawbacks of additively built smart materials.

Advanced 3D printing techniques, including stereolithography (SLA), fused deposition modeling (FDM), selective laser sintering (SLS), electron beam melting (EBM), direct ink writing (DIW), and 3D plotting are discussed in detail. The book also offers a thorough analysis of the microstructure, mechanical, thermal, and surface properties of smart materials and structures produced using additive manufacturing.

Provides a review of recent advances, design techniques, technological challenges, and applications of additively manufactured smart materials
Discusses the microstructure, mechanical, thermal, and surface properties of additively manufactured smart materials
Covers the fundamentals of all additive manufacturing techniques, fabrication, processing, design strategies, and various properties of additively manufactured smart materials
Explores various printing issues and new challenges associated with the development of advanced functional materials and structures using AM or 3D printing techniques

Produktinformation

Utgivningsdatum2025-08-27
Mått152 x 229 x undefined mm
Vikt840 g
FormatHäftad
SpråkEngelska
SerieAdditive Manufacturing Materials and Technologies
Antal sidor528
FörlagElsevier Science
ISBN9780443161445

Tillhör följande kategorier

Maskinteknik och material inom Naturvetenskap och teknik

Dr. Rajkumar Velu is an Assistant Professor at the Indian Institute of Technology, Jammu. He held positions as a Post-Doctoral Research Fellow at the Digital Manufacturing and Design Centre (DManD), Singapore University of Technology and Design, and a Research Fellow at the Centre for Laser Aided Intelligent Manufacturing (CLAIM), University of Michigan. Dr Velu is also the recipient of the prestigious GATE scholarship. Dr. Velu's research focuses on engineering design, optimization, and the creation of innovative manufacturing techniques (additive manufacturing) and materials for designing and fabricating for biomedical and aerospace applications. Kalim Deshmukh is a senior researcher at the New Technologies-Research Centre, University of West Bohemia, Pilsen, Czech Republic. He has over 20 years of research experience working with a wide variety of polymers and nanomaterials, including metal oxide nanoparticles and two-dimensional (2D) materials like graphene and MXenes. His research interest is mainly focused on the synthesis, characterization, and investigations of the structure–property relationship of polymer nanocomposites and nanohybrids reinforced with different nanofillers, including various metal oxides, carbon allotropes, and novel 2D materials for energy storage and conversion, energy harvesting, electromagnetic interference shielding, gas sensing, and biomedical applications.Inigo Flores Ituarte is a research professor and industry professional whose research focuses on optimization-driven design and manufacturing, engineering design, digital design, and advanced manufacturing. The overarching research goal of his research lab is how to engineer digital design and manufacturing systems that maximize product and process performance while improving cost-effectiveness, efficiency on energy and raw materials utilization, and minimize environmental impact. Dr. Anand Kumar Subramaniyan is Assistant Professor at the Indian Institute of Technology Jammu. His research specialty is in the field of manufacturing engineering with a specialized focus on additive manufacturing.

1. Advanced Additive Manufacturing Technologies: Methods, Instrumentation, Materials and Key Requirements, Design Optimizations, Advantages and Limitations2. Fabrication of Smart Materials and Structures by Additive Manufacturing Techniques3. Microstructure, Mechanical and Surface Properties of Additively Manufactured Materials4. Additive Manufacturing of Metals and Superalloys5. Additively Manufactured Thermoelectric and Magnetoelectric Materials6. Additively Manufactured Ceramics and Metamaterials: Prospects and Challenges7. Additively Manufactured Stimuli Responsive Materials and Structures8. Polymer Nanocomposites Based Additively Manufactured Smart Materials and Structures9. Additively Manufactured Hydrogels: Recent Developments and Future Perspectives10. Surface Modification and Surface Coating Techniques of Additively Manufactured Materials and Structures11. Numerical Simulations and Computational Modelling of Additively Manufactured Materials and Structure12. New Frontiers and Applications of Machine Learning Tools in Additive Manufacturing13. Additively Manufactured Smart Materials and Structures in Membrane Technology14. Additively Manufactured Smart Materials and Structures for Catalytic Applications15. Additively Manufactured Smart Materials and Structures for Batteries and Supercapacitors16. Additively Manufactured Smart Materials and Structures for Electrochemical Sensing and Bionsensing17. Additively Manufactured Smart Materials and Structures for Automobile and Aerospace Applications18. Additively Manufactured Smart Materials and Structures in Construction and Building Applications19. Additively Manufactured Smart Materials and Structures for Various Biomedical Applications20. Techno-economic Aspects and Perspectives of Additive Manufacturing Techniques in Industry 4.o Revolution21. Life Cycle Assessment of Additive Manufactured Products and Impact of Additive Manufacturing on the Environment and Supply Chain Management

Mer från samma serie

Science, Technology and Applications of Metals in Additive Manufacturing

Bhaskar Dutta, Sudarsanam Babu, Bradley H. Jared, LLC) Dutta, Bhaskar (COO, DM3D Technology, USA) Babu, Sudarsanam (University of Tennessee, Knoxville, TN, Sandia National Laboratories) Jared, Bradley H. (Principal Member of the Technical Staff

Häftad

2 099 kr

Design for Additive Manufacturing

Martin Leary, Australia) Leary, Martin (Associate Professor, School of Engineering, RMIT University

Häftad

1 569 kr

Multiscale Modeling of Additively Manufactured Metals

Yi Zhang, Yeon-Gil Jung, Jing Zhang, Inc) Zhang, Yi (Ansys, Republic of Korea) Jung, Yeon-Gil (School of Materials Science and Engineering, Changwon National University, USA) Zhang, Jing (Department of Mechanical and Energy Engineering, Indiana University - Purdue University Indianapolis

Häftad

2 039 kr

3D Printing in Biotechnology

Nandita Dasgupta, Vineeta Singh, Shivendu Ranjan, Taijshee Mishra, Bhartendu Nath Mishra, India) Dasgupta, Nandita (LV Prasad Eye Institute, Bhubaneswar, Lucknow) Singh, Vineeta (Department of Biotechnology, Institute of Engineering and Technology, Kharagpur) Ranjan, Shivendu (School of Nano Science and Technology (SNST), Indian Institute of Technology, Government of India) Mishra, Taijshee (Consultant, NITI Aayog, Lucknow) Mishra, Bhartendu Nath (Department of Biotechnology, Institute of Engineering and Technology

Häftad

2 069 kr

4D Printing

Rupinder Singh, India) Singh, Rupinder (Professor and Head, Department of Mechanical Engineering, National Institute of Technical Teacher Training and Research, Chandigarh

Häftad

1 769 kr

Laser Additive Manufacturing of Metallic Materials and Components

Dongdong Gu, China) Gu, Dongdong (Full Professor, College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), China; Director, Jiangsu Provincial Engineering Laboratory for Laser Additive Manufacturing of High-Performance Metallic Components

Häftad

2 989 kr

Smart Materials in Additive Manufacturing, volume 1: 4D Printing Principles and Fabrication

Mahdi Bodaghi, Ali Zolfagharian, UK) Bodaghi, Mahdi, BSc, MSc, PhD, PGCAP, FHEA, CEng, MIMechE (Senior Lecturer, Department of Engineering, School of Science and Technology, Nottingham Trent University, Australia.) Zolfagharian, Ali, BSc, MSc, PhD, ADPRF, GCHE (Senior Lecturer in the Faculty of Science, Engineering and Built Environment, School of Engineering at Deakin University

Häftad

2 759 kr

Fundamentals of Laser Powder Bed Fusion of Metals

Igor Yadroitsev, Ina Yadroitsava, Anton Du Plessis, Eric MacDonald, South Africa) Yadroitsev, Igor (Research Chair, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa) Yadroitsava, Ina (Senior Researcher, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa) Du Plessis, Anton (Applications Scientist, Object Research Systems Inc, Montreal, Quebec, Canada; Associate Professor, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, USA) MacDonald, Eric (Professor and Murchison Chair, W. M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, Texas

Häftad

2 289 kr

Additive Friction Stir Deposition

Hang Z. Yu, USA) Yu, Hang Z. (Associate Professor of Materials Science and Engineering, Virginia Tech

Häftad

2 119 kr

Additive Manufacturing of Glass

Bastian E. Rapp, Frederik Kotz-Helmer, Germany) Rapp, Bastian E. (Head of Group, Institute of Microstructure Technology (IMT), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany) Kotz-Helmer, Frederik (Laboratory of Process Technology, Department of Microsystems Engineering (IMTEK), University of Freiburg

Häftad

2 379 kr

Du kanske också är intresserad av

Machine Learning for Powder-Based Metal Additive Manufacturing

Gurminder Singh, Farhad Imani, Asim Tewari, Sushil Mishra

Häftad

2 919 kr

Additive Manufacturing Solutions for Advanced Veterinary Practice

Singh,Rupinde, Rupinder Singh, Ranvijay Kumar, Vinay Kumar, India) Singh, Rupinder (Professor and Head, Department of Mechanical Engineering, National Institute of Technical Teacher Training and Research, Chandigarh, India) Kumar, Vinay (Assistant Professor at University Centre for Research and Development, Chandigarh University, University Center for Research and Development, Chandigarh University, Mohali, India) Kumar, Ranvijay (Assistant Professor, Marwadi University Research Center, Marwadi University, Gujarat, India) Kumar, Vinay (Assistant Professor, University Centre for Research and Development, Chandigarh University

Häftad

3 089 kr

Additive Manufacturing of Magnetic Materials

Attallah,Moata, Moataz Attallah, Abdelmoez Hussein, UK Attallah, Moataz, Professor of Advanced Materials Processing and Director of Research and Knowledge Transfer, School of Metallurgy and Materials, University of Birmingham, UK Hussein, Abdelmoez, Research Fellow, School of Metallurgy and Materials, University of Birmingham

Häftad

3 529 kr

Smart Materials in Additive Manufacturing, volume 1: 4D Printing Principles and Fabrication

Häftad

2 759 kr

3D Printing in Biotechnology

Häftad

2 069 kr

Vat Photopolymerization Additive Manufacturing

Xiaolong Wang, China) Wang, Xiaolong (Full Professor, Chinese Academy of Sciences' Lanzhou Institute of Chemical Physics (LICP), Chinese Academy of Sciences (CAS)

Häftad

2 839 kr

Advances in Additive Manufacturing

Ravi Kant Mittal, Abid Haleem, Ajay Kumar, UAE.) Mittal, Ravi Kant, B.E. (Hons.) & M.E., Mechanical Engineering, and Ph.D. degrees from BITS Pilani, India (Retired Senior Professor, Birla Institute of Technology and Science, Pilani, India. Former Director of the offshore campus of BITS Pilani at Dubai, India) Haleem, Abid (Professor of Mechanical Engineering, Jamia Millia Islamia (A Central University by an Act of Parliament) in New Delhi, India) Kumar, Ajay (Professor (Research Track), Department of Mechanical Engineering, School of Core Engineering, Faculty of Science, Technology & Architecture, Manipal University Jaipur

Häftad

2 379 kr

Fundamentals of Laser Powder Bed Fusion of Metals

Häftad

2 289 kr

Additively Manufactured Smart Materials and Structures

Design, Processing, and Applications

Produktinformation

Tillhör följande kategorier

Mer information

Innehållsförteckning

Mer från samma serie

Du kanske också är intresserad av

Loading component...

Loading component...

Additively Manufactured Smart Materials and Structures

Design, Processing, and Applications

Produktinformation

Tillhör följande kategorier

Mer information

Innehållsförteckning

Mer från samma serie

Du kanske också är intresserad av

Akademibokhandeln

Hjälp

Tjänster

Erbjudanden

Inspiration